

- 06-1912 -- Stock washer, $0.96.
- 06-1912/SS -- Stainless washer, $6.79.

The stainless washer will not tab over like the stock washer. What you need to do is drill a 1/16" hole in the rib of the lower yoke and the steering stem nut and safety wire as shown in the above picture. Note: You also need to break off a section of the washer and this is easily done by placing the washer in a vise and bending it over.
Norton Parts .Frame, Front Forks
This page was written and designed by F. H. Eaton
& Associates if you have any questions or comments please
contact us at infon@fheaton.com