We currently list eight, 40 spoke shouldered Excel rims drilled for Commando hubs, but we can normally have Excel rims drilled to fit most standard hubs (36 or 40 spoke). You can order the rim drilled for your hub or you can send us your hub and we will have a rim drilled, laced and trued to your hub for $107.00 (not including the cost of the spokes or nipples).
The Commando rims are:
06-7712/A, Excel shouldered rim, WM3x19, Commando front or rear drum,
$260.00.
06-7712/B, Excel shouldered rim, WM3x18, Commando front or rear drum,
$260.00.
06-7712/D, Excel shouldered rim, WM4x18, Commando rear drum,
$225.00.
06-1951/A, Excel shouldered rim, WM3x19, Commando front disc,
$260.00.
06-1951/C, Excel shouldered rim, WM3x18, Commando front disc,
$240.00.
06-6119/B, Excel shouldered rim, WM3x19, MK3 rear disc,
$225.00.
06-6119/C, Excel shouldered rim, WM3x18, MK3 rear disc,
$240.00.
06-6119/D, Excel shouldered rim, WM4x18, MK3 rear disc,
$225.00.
Note: Rim sizes - WM3 = 2.15" inside width, WM4 = 2.5" inside width.
The recommended tire sizes for a WM3 are: 4.00" to 4.25" or 100 to 110 Metric.
The recommended tire sizes for a WM4 are: 4.50" to 5.10" or 110 to 120 Metric.
The first two pictures show the rim with its clear anodized coating and in the third picture
the anodized rim is placed on top of an Excel rim that has had the coating removed.
As you can see the polished rim with the coating removed is only slightly brighter than the
anodized rim. We can have the coating removed and polished for
DROPPED.
Norton Parts …..Wheels, Brakes…..Brakes
This page was written and designed by F. H. Eaton
& Associates if you have any questions or comments please
contact us at info@fheaton.com