Made to B.S.F./B.S.W. l in. form with section 11/2 in. across flats. This spanner is especially made to remove the large nut securing the countershaft sprocket and also fits the large sump plug/strainer fitted to certain models. When removing the countershaft sprocket nut. remember that this nut has a left-hand thread and must be replaced very tightly - 80 ft/lb torque.

This spanner now has a smaller size end of 1 5/16 in. (not shown in the drawings) that will also fit the fork top nuts (06-0345).

This page was written and designed by F. H. Eaton & Associates if you have any questions or comments please contact us at info@fheaton.com