
Frame, Swinging Arm, Suspension Units
Group 14
To order electronically:
click on the Order button for the part you want to place in your shopping cart.
Alternative Parts:
If there is a Yes in the Alt column,
click on the Yes to see the alternative parts.
Last updated 02/12/21
Ref No. | Part No. | Description | Qty. Req. | Qty. on Hand | Status | Price | Alt |
1 | |||||||
1A | |||||||
2 | ID Plate, 72 750, 73 850 | ||||||
3 | ID Plate Rivet | ||||||
4 | Decal, OIL RECOMMENDATIONS, 1973/74 | ||||||
5 | Dzus Fastener, Sidepanel | ||||||
6 | Circlip, Dzus Fastener | ||||||
7 | Bracket, Top, Side Panel | ||||||
8 | Hex Head Bolt, 1/4 x 28, 5/8", Plated | ||||||
9 | Washer, 1/4" Flat, Plated | ||||||
10 | Hex Nut 1/4 x 28, Plated | ||||||
11 | Cupped Washer | ||||||
12 | Commando Seat Knob | ||||||
13 | Pin, Dowel, Split, Seat Knob | ||||||
14 | |||||||
15 | Dustcover, Swingarm, Commando | ||||||
16 | Bush, Swingarm, 1 1/2" Long, Pre-MK2A | ||||||
17 | O-Ring, Commando Swingarm, Large | ||||||
18 | O-Ring, Swingarm | ||||||
19 | Bolt, 5/16 x 24, Chain Adjuster, Pre-MK3 | ||||||
20 | Hex Nut, 5/16 x 24, Plated | ||||||
21 | Swingarm Pivot Spindle, Pre-MK2A, .8745" OD | ||||||
22 | Hex Head Bolt, 1/4 x 28, 1/2", Plated | ||||||
23 | Washer, 1/4" Flat, Plated | ||||||
24 | End Cap, Swingarm, Left Hand | ||||||
25 | End Cap, Swingarm, Right Hand | ||||||
26 | Rod, Threaded, Swing Arm | ||||||
27 | Washer, Copper | ||||||
28 | Nipple, Lubrication, 1/4 x 28 | ||||||
29 | Commando Shock, 118 lbs., 13", Set, Andover | ||||||
30 | Not Available | 2 | - | NA | 0 | No | |
31 | Not Available | 2 | - | NA | 0 | No | |
32 | SPRING RETAINING COLLET | 4 | - | NA | 0 | No | |
33 | Stud, Seat and Shock Mount | ||||||
34 | Washer, 3/8, Flat, Plated | ||||||
35 | Hex Nut, 3/8 x 24, Plated | ||||||
36 | Bolt, 3/8 x 24, 2", Shock Mount, Plated | ||||||
37 | Washer, 3/8, Flat, Plated | ||||||
38 | Washer | ||||||
39 | Hex Nut, 3/8 x 24, Plated | ||||||
40 | Side Stand MK3, Works for 72 on with Space | ||||||
41 | Side Stand Spacer, Pre MK3 .625 O.D. | ||||||
42 | Side Stand Spring | ||||||
43 | Hex Nut, 7/16 x 20 Lock, Thin, Plated | ||||||
44 | Washer, 7/16 Flat | ||||||
45 | Washer, Spring, 7/16" | ||||||
46 | Bolt, 7/16 x 20 Side Stand (High Tensile) | ||||||
47 | Rubber Buffer, Side Stand | ||||||
48 | Chainguard, Chrome, Commando 1971-73 | ||||||
49 | Hex Head Bolt, 1/4 x 28, 1 3/4", Plated | ||||||
50 | Washer, 1/4" Flat, Plated | ||||||
51 | Hex Nut 1/4 x 28, Plated | ||||||
52 | Washer, Fiber | ||||||
NOT ILL | |||||||
NOT ILL | Pre-MK3 Swinging Arm Rebuild Kit | ||||||
NOT ILL | Grommet, Harness, Front Large Opening in Frame | ||||||
NOT ILL | Rear Frame Grommet, 13/16" x 1", W Harness |
NOTE: * Use this spacer only with original stand.
NOTE: ! Use 06-5491 if ordering a new stand.
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information
This page was written and designed by F. H. Eaton & Associates.