
Frame, Miscellaneous
We try to keep all information current, but regret that prices
and availability are subject to change. Special Order Items (SO) are priced as of the last time we sold one.
Last updated 02/12/21.
Please Note: the "13-" preceding all order numbers is an Old Britts grouping code. The second portion of the order number is normally the factory part number (e.g., 13-060627 is the Norton part 06-0627). When ordering, you can use our order number or the factory part number.
Spacer, Center Stand, .680"x.453"x.300", Pre MK3 | 12 | - | ||
Washer, 7/16 Flat | 17 | - | ||
Decal, Oilbath | 4 | - | ||
Rear Frame Grommet, 13/16" x 1", W Harness | 9 | - | ||
Decal, OIL RECOMMENDATIONS, 1971-72 | 1 | - | ||
Horn | 0 | NA | ||
Horn 12v, 2.5" Chrome | 3 | - | ||
Horn 12v, 4" Chrome | 2 | - | ||
Horn Brackets, Set of 2, USED, Powder Coat, Black | 1 | - | ||
Side Stand Pivot Pin, with two Circlips | 2 | - | ||
Circlip, Prop Stand Pivot, Early | 0 | NA | ||
Circlip Prop Stand Pivot,Early, Thicker than stock | 0 | NA | ||
Grommet, MK3 | 17 | - | ||
Decal, Norton Logo, Small, Gold w/bl edge, Dryfix | 3 | - | ||
Decal, MADE IN ENGLAND (03-5073, 06-4062, 03-0517) | 5 | - | ||
Washer, Flat, Chaincase Center Nut | 6 | - | ||
Washer, Flat, USED | 0 | NA | ||
Bolt, 3/8 x 24, 2", Shock Mount, Plated | 8 | - | ||
Short Bolt, 3/8 x 24, 1 1/2", Shock Mount, SS | 1 | - | ||
Bolt, 3/8 x 24, 2", Shock Mount, Stainless | 0 | NA | ||
Center Stand, Early 750, Frame Mounted | 0 | NA | ||
Spacer, 5/8OD, 7/16ID, 1/2L | 6 | - | ||
Hex Bolt, 7/16 x 20, 1 1/4", Plated, Grade 8 | 12 | - | ||
Hex Bolt, 7/16 x 20, 1 1/4", Plated, Grade 5 | 105 | - | ||
Hex Nut, 7/16 x 20, Lock, Plated | 29 | - | ||
Hex Nut, 7/16 x 20, Lock, Stainless | 40 | - | ||
Hex Head Bolt, 1/4 x 28, 1", Plated | 90 | - | ||
Side Stand, Pre 71 Commando, Frame Mounted | 2 | - | ||
Spring, Early Side Stand | 5 | - | ||
Hex Head Bolt, 3/8 x 24, 1 1/4", Plated | 47 | - | ||
Bolt, 3/8 x 24, USED | 19 | - | ||
Oiler Outlet, Rear Chain | 2 | - | ||
Bracket, Reflector | 0 | NA | ||
Decal, DO NOT OVERFILL O-TANK | 0 | NA | ||
Spring, Early Center Stand | 1 | - | ||
Decal, Black Gold Trim, 6", transfer | 5 | - | ||
Decal, 750 Commando, Fastback Tail, Dryfix | 3 | - | ||
Screw, 1/4 x 20 | 8 | - | ||
Grommet, Fiberglass Covers | 8 | - | ||
ID Plate, 750 | 3 | - | ||
ID Plate Rivet | 24 | - | ||
Extension Spring, Center Stand | 2 | - | ||
ID Plate, 750, 1971 | 3 | - | ||
Spacer, Center Stand | 7 | - | ||
Side Stand, 71 Commando | 0 | NA | ||
Rubber Cover, Ign.sw, Front and Rear (2 pieces) | 3 | - | ||
Side Panel, LH Fastback, 71 on, Fiberglass | 0 | NA | ||
Side Panel, LH Fastback, Fiberglass,Tool Bx,USED | 1 | - | ||
Screw, 10 x 24, 2" | 13 | - | ||
Blade | 0 | NA | ||
Spring, Center Stand, 71 and 72 | 4 | - | ||
Spring, Side Stand, 1971 | 3 | - | ||
Bracket, Ignition Coils | 2 | - | ||
Bracket, Ignition Coils, USED | 0 | NA | ||
Side Stand Spring | 2 | - | ||
Side Stand Spacer, Pre MK3 .625 O.D. | 5 | - | ||
Grommet, Steel Sidepanels | 6 | - | ||
ID Plate, 72 750, 73 850 | 3 | - | ||
Rubber Buffer, Side Stand | 4 | - | ||
Side Panel, Roadster, LH, 71-74, Steel, Primed | 0 | NA | ||
Sidepanel, Roadster, LH, Tool Box, Steel, USED | 2 | - | ||
Side Panel, Roadster, RH 71 on, Steel | 0 | NA | ||
Alum. Washer 3/8" | 28 | - | ||
Oil Tank Level Decal | 4 | - | ||
Decal, BREAK-IN PERIOD | 3 | - | ||
Decal, GAS RECOMMENDATIONS | 2 | - | ||
Decal, OIL RECOMMENDATIONS, 1973/74 | 8 | - | ||
Center Stand, Late 750 & 850, Plate Mount | 1 | - | ||
Spacer, Stepped Centerstand | 9 | - | ||
Grommet, Tail Lamp Wire | 10 | - | ||
Rubber Pad, Rear Mudguard Mount, 1 1/2" x 3/4" | 3 | - | ||
Spring Center Stand, 73 and Later | 3 | - | ||
Screw, 1/4 x 20 Philip Head | 4 | - | ||
Gearbox Top Bolt Nut, 9/16 x 18 | 3 | - | ||
Center Stand Kit, 71 to 75 Commandos, Complete | 1 | - | ||
Rubber Cover, Ign.sw, Rear | 3 | - | ||
Rubber Cover, Ign.sw, Front | 4 | - | ||
Decal, European Suppression Approval | 7 | - | ||
Bolt, 7/16 x 20 Side Stand (High Tensile) | 2 | - | ||
Side Stand MK3, Works for 72 on with Space | 1 | - | ||
Side Stand Spacer for MK3 or New .687" OD | 5 | - | ||
Screw, 1/4 x 20 Philip Head | 6 | - | ||
Decal, GEARSHIFT PATTERN | 2 | - | ||
ID Plate, 850 MK3, USA/CANADA | 3 | - | ||
Side Stand Kit, 72-75 Commando, Complete | 1 | - | ||
Clip, Consol Lamps | 12 | - | ||
Washer, 5/16, Flat, Thick | 26 | - | ||
Washer, 5/16, Flat, Thick, Stainless | 22 | - | ||
ID Plate, 850 MK3, EUROPE | 5 | - | ||
Decal, OIL RECOMMENDATIONS, NVT | 4 | - | ||
Luggage Frame, Black, 1968 through early 1971 | 0 | NA | ||
Luggage Frame, Chrome, 1972 through 1975 MK3 | 1 | - | ||
Engine Stand | 0 | NA | ||
Rubber Washer | 4 | - | ||
Grommet, Left Rear Zener Wire, MK3 | 5 | - | ||
Bolt, 2BA | 11 | - | ||
Screw, 2BA | 14 | - | ||
Nut, 7/16 x 20, Thin | 10 | - | ||
Hex Nut, 7/16 x 20 Lock, Thin, Plated | 20 | - | ||
Bolt, 5/16 x 18, 7/8", Thin Head, Plated | 4 | - | ||
Hex Head Bolt, 5/16 x 18, 7/8" Stainless | 28 | - | ||
Bolt, 5/16 x 18, USED | 2 | - | ||
Gaiters, Pre 1971, Each | 2 | - | ||
Decal, NORTON/TRIUMPH, Made in England | 5 | - | ||
Patent Plate, Red | 7 | - | ||
Nut, 1/4 x 26, Plain | 13 | - | ||
Powder Coating Blanking Hardware Kit, MK3 | 2 | - | ||
Powder Coating Blanking Hardware Kit, Pre-MK3 | 2 | - | ||
Washer | 5 | - | ||
Washer, USED | 4 | - | ||
Washer, Spring, 7/16" | 11 | - | ||
Allen Bolt, 1/4 x 20, 5/8", Stainless Steel | 37 | - | ||
Decal, MADE IN ENGLAND, Script Transfer | 6 | - |
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information
This page was written and designed by F. H. Eaton & Associates.