
Engine, Timing Cover, Oil Pump
We try to keep all information current, but regret that prices
and availability are subject to change. Special Order Items (SO) are priced as of the last time we sold one.
Last updated 02/12/21.
Please Note: the "11-" preceding all order numbers is an Old Britts grouping code. The second portion of the order number is normally the factory part number (e.g., 11-060627 is the Norton part 06-0627). When ordering, you can use our order number or the factory part number.
Contact Breaker / Distributer Cover | 1 | - | ||
Contact Breaker Cover Clip | 2 | - | ||
Contact Breaker Drive Sprocket | 0 | NA | ||
O-Ring, Points, Atlas Type | 3 | - | ||
Oilseal, Crank, Right Side | 7 | - | ||
Oil Seal Circlip | 6 | - | ||
Oil Seal Circlip, USED | 6 | - | ||
Hex Nut, 3/8 x 24, Lock, Stainless | 76 | - | ||
Junction Block, Oil Line, 68 - 69 | 1 | - | ||
Timing Cover, Engine | 0 | NA | ||
Gear/Sprocket, Idler, With Bush, Pre-MK3 | 2 | - | ||
Gear/Sprocket, Idler, USED | 1 | - | ||
Shaft, Intermediate Gear | 2 | - | ||
Bush Intermediate Gear, Ream to .5627-.5620 | 4 | - | ||
Sprocket, Camshaft, 18T | 2 | - | ||
Points Cover | 1 | - | ||
Sleeve, Rubber, Points Wire | 7 | - | ||
Points Cover Screw, 2BA | 16 | - | ||
Points Cover Screw, 2BA, USED | 4 | - | ||
O-Ring, Tach Drive, Pre 75 | 9 | - | ||
Junction Block, Oil Line, Pre MK2A & MK3 | 2 | - | ||
Key, Oilpump Drive Gear | 5 | - | ||
Key, Oilpump Drive Gear, USED | 0 | NA | ||
Stud, 5/16 x 18 x 24 | 6 | - | ||
Stud, 5/16x18x24, USED | 4 | - | ||
TimingCover/Crankcase Screw 1/4 x 20 1 1/4 | 9 | - | ||
TimingCover Screw, 1/4x20, Long, USED | 13 | - | ||
Timing Cover Screw, 1/4 x 20, 1 1/8" Long | 12 | - | ||
Timing Cover Screw, 1/4 x 20, 1" Long | 12 | - | ||
Timing Cover Screw, 1/4x20, Short, USED | 14 | - | ||
Crankcase Bolt, Short, 5/16 x 24, 1 3/8" | 8 | - | ||
Oil Pump Complete | 1 | - | ||
Oilseal, Points | 4 | - | ||
Junction Block, Oil Line, MK2A & MK3 | 2 | - | ||
Slipper, Camchain, Rubber Face | 1 | - | ||
Clip, Rocker Feed Pipe | 3 | - | ||
Bush Intermediate Gear, Requires Reaming to 9/16" | 2 | - | ||
Inspection Cap, MK3 Timing Cover | 4 | - | ||
Inspection Cap, MK3 Timing Cover, USED | 3 | - | ||
O-Ring, Insp. Cover, MK3 Timing Cover | 5 | - | ||
Washer, Sealing, Mk3 Oilpump | 10 | - | ||
Body Assembly, Pressure Relief Valve | 1 | - | ||
Spring, Checkvalve, Mk3 | 3 | - | ||
Plunger, Checkvalve, Mk3 | 3 | - | ||
Stud, 5/16, Cam Chain Tensioner | 4 | - | ||
Washer, Sealing, Oil Pump | 7 | - | ||
Washer, Cupped, Crank Bearing | 0 | NA | ||
Pressure Relief Valve Piston | 3 | - | ||
Pressure Relief Valve Piston, USED | 0 | NA | ||
Washer, Relief Valve, Nut | 12 | - | ||
Washer, Relief Valve, Union | 8 | - | ||
Cap, Pressure Relief Valve | 1 | - | ||
Cap, Pressure Relief Valve, Stainless | 1 | - | ||
Cap, Pressure Relief Valve, USED | 7 | - | ||
Spring, Pressure Release Valve | 2 | - | ||
Spring, Pressure Release Valve, USED | 5 | - | ||
Washer, 9/16, Flat | 3 | - | ||
Gasket, Magneto to Case | 4 | - | ||
Slipper, Camchain, Pre 71 | 1 | - | ||
Slipper, Camchain, Pre 71, USED | 3 | - | ||
Plate, Camchain Adjuster, Thin | 3 | - | ||
Plate, Camchain Adjuster, Thick | 4 | - | ||
Plate, Camchain Adjuster, Thin, USED | 0 | NA | ||
Oil Pump Stud | 4 | - | ||
Screw, 1/4 x 20, Timing Cover Short | 12 | - | ||
Washer, Shim, Pressure Relief Valve | 13 | - | ||
Screw, Oilpump Body | 9 | - | ||
Feed Bush, Oil Pump, MK3 & Eariler Upgrade | 2 | - | ||
Key, Oilpump, Pre 72 | 5 | - | ||
Chain, Camshaft, .375, 38 Pitches, Single | 2 | - | ||
Circlip, Intermediate Shaft | 7 | - | ||
Grommet, Points Wire, Early | 0 | NA | ||
Sprocket, Camshaft | 1 | - | ||
Spacer, Oil Pump Sealing Washer | 5 | - | ||
Dowel, Hollow, Oil Junction Block | 3 | - | ||
Screw, 1/4 x 20, Timing Cover Long, Early | 8 | - | ||
Gear, Oilpump Worm, 6 Start | 1 | - | ||
Gear, Oil Pump Drive | 2 | - | ||
Nut, 3/8 x 24, Lock, Thin | 18 | - | ||
Timing Cover Badge | 5 | - | ||
Nut, 5/16 x 26, Small Hex, Early | 2 | - | ||
Fiber Washer for Magneto Fixing Bolt | 0 | NA | ||
Chain, Ignition/Magneto, 42 Pitches, Singl | 0 | NA | ||
Magneto Fixing Bolt, 1/4 x 26 | 2 | - | ||
Intermediate Gear C/W Bush | 0 | NA | ||
Magneto Fixing Stud, 5/16 x 26 x 18 | 4 | - |
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information
This page was written and designed by F. H. Eaton & Associates.