Bottom End Rebuild Estimate, 1972 750, ESTIMATE
This assembly, kit or service (part # 39-300401) consists of the following items
Last updated 02/12/21
| Ref No. | Part No. | Description | Qty. Inc. | Qty. on Hand | Status | Unit Price | Extended Price |
| LABOR ESTIMATE | |||||||
| 1 | EW | Dismantle timing gears, oil pump, etc. and establish base line end play for cam and crank. | |||||
| 2 | EW | Split cases, clean parts, remove main bearings. | |||||
| 3 | EW | Bead blast crank cases with walnut shells. | |||||
| 4 | 39-300901 | Mill Customer's 1972 Drive Side Crank Case | |||||
| 5 | EW | Other crank case modifications work to change how oil is scavenged and move breather to timing side case. | |||||
| 6 | EW | Remove conrods, disassemble crank and clean. | |||||
| 7 | EW | Reassemble crank and polish journals. | |||||
| 8 | EW | Replace old cam bushings, line ream new bushings and dry fit cam to verify proper end play and free rotation. | |||||
| 9 | EW | Dry fit crank and set proper end play. | |||||
| 10 | EW | Clean crank cases again and paint. | |||||
| 11 | EW | Polish conrods and bolt up to crank. | |||||
| 12 | EW | Final assembling of crank case with cam and crank. | |||||
| 13 | EW | Time cam and assemble oil pump, etc. | |||||
| PARTS NORMALLY REQUIRED | |||||||
| 14 | 06-4285 | Conrod Bearing, Std, Set (2 Top, 2 Bottom) | |||||
| 15 | 06-4896 | Conrod Assy., Twins, (includes bolts & nuts), Each | |||||
| 16 | 06-6486 | Bolt, Conrod | |||||
| 17 | 06-7827 | Nut, 3/8 x 26, Lock, Conrod | |||||
| 18 | 06-1084 | Camshaft, 1970 on Commando With Lube Pack | |||||
| 19 | 06-5425 | Bush, Cam, 850 & MK3, L.H. | |||||
| 20 | 06-3020 | Bush, Cam, 1973/74 850 R.H. | |||||
| 21 | 00-0572 | Key, Timing Pinion and Camshaft | |||||
| 22 | 06-2601 | Washer, Thrust, Camshaft, Some 1972 | |||||
| 23 | 06-4118 | Superblend Roller Bearing, Crankshaft, C3 | |||||
| 24 | 06-7120 | Crank Bolt Set, 750cc | |||||
| 25 | 06-4647 | Slipper, Camchain, Rubber Face | |||||
| 26 | 06-7689 | Chain, Camshaft, .375, 38 Pitches, Single | |||||
| 27 | 06-2447 | Gasket, Oil Pump | |||||
| 28 | 06-1092 | Gasket, Timing Cover | |||||
| 29 | 06-7510 | Washer, Sealing, Oil Pump | |||||
| 30 | 04-8023 | Oilseal, Crank, Right Side | |||||
| 31 | 06-7567 | Oilseal, Main Bearing | |||||
| 32 | 03-4053 | Oilseal, Points | |||||
| 33 | 06-5200 | Modified Tachdrive Housing, With Oil Seal | |||||
| 34 | 06-3056 | Gasket, Tachdrive Housing | |||||
| 35 | 06-2620/BK | Breather Housing Blanking Plate for 1972, Kit | |||||
| 36 | 06-1542/AMK | Aluminum CC Blanking Plate Modified for 72, Kit | |||||
| 37 | 06-7646 | Washer, Shim, Pressure Relief Valve | |||||
| 38 | 06-7541 | Washer, Relief Valve, Nut | |||||
| 39 | 06-7542 | Washer, Relief Valve, Union | |||||
| NOTE | Labor hours are a close estimate. Parts list is worst case and may vary depending on usability of old parts. | ||||||
| Total Extended Price | 3574.95 |
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information
This page was written and designed by F. H. Eaton & Associates.


